Arduino is an open source computer hardware and software company, project, and user community that designs and manufactures single-board microcontrollers and microcontroller kits for building digital devices and interactive objects that can sense and control objects in the physical world. The project's products are distributed as open-source hardware and software, which are licensed under the GNU Lesser General Public License (LGPL) or the GNU General Public License (GPL), permitting the manufacture of Arduino boards and software distribution by anyone. Arduino boards are available commercially in preassembled form, or as do-it-yourself (DIY) kits.
HIDUINO: A firmware for building driverless USBMIDI devices using the Arduino microcontroller Dimitri Diakopoulos1 California Institute of the Arts1
Low level programming of the Arduino DUE SAM3 controller with a custom The PCB additionally contains two micro USB ports MAINOSCFREQ (main oscillator.
junXion is an application for connecting sensors, joysticks, OSC, Audio, Arduino, and camera devices up to your computer for control over sound and visuals. junXion.
I have written some C# code to send a Byte Array over Serial from my PC to an Arduino my PC to an Arduino Nano board (Through a USB to Arduino Flash to.
40 PIN, 32 KB ENH FLASH, 2048 RAM, FSUSB 2. 0 GigEpack Ethernet Products. Advanced design techniques ensure reliable operation under extreme conditions while.
Video embeddedDigispark known as USB Development Board base on ATMEL Attiny85 microcontroller similar to Arduino Board line, the difference is smaller and limited pins.
Rosco is an app that connects to an arduino over USB serial to convert analog and digital signals into OSC messages. Oscar is an OSCtoFlash bridge.
Code to drive an rgb led attached to an arduino. Processing is used to accept OSC messages, and forward them over a the serial portusb to an arduino, which controls.
thoughts on Programming an Arduino over WiFi more expensive with a USB port and make an awesome IDE and WiFi enabled Flash.
In this instructable you will learn how to connect to your arduino and control it over the net, set up a video stream, Arduino Flash AS3 Tuesday.
There are 4 main components needed to getting an Arduino to communicate with Flash: Code to run on the Arduino: This sends data over the USB virtual serial port.
Video tutorial on how to setup communication between Arduino and Flash suggest to try it first with an USB cable over the serial looking to OSC communication.
arduino based camera and flash and controlled via the Arduino board. You can play your sounds over the on Arduino using USB.
It turns out that it is quite easy to get Alexa communicate with Arduino via Raspberry Pi with Node-RED. All you have to do is installing two Node-RED modules and setup up a Node-RED Flow with Alexa Local and Arduino nodes. Here I have a project which has Alexa turn on and off two LED lights as a demo.
My staircase has claimed a broken toe some time ago. Fortunately, it wasn’t my toe, but I feel for the poor fella. The toe is OK now, but it got me thinking, is there anything I could do to reduce the risk of dealing with another victim? Plus if I could do this on the cheap, that would be super!
After some my Arduino project remains unclaimed touchscreen, so I decided to realize my chidhood dream to create a chess program. After a couple of months it wins me, but it is not big deal because i do not have any chess rating, just amateur.
My name is Maxime Coutté. I’m 16 years old and I live in a small village in France where I’m the only teenager. With my best friends, Jonas Ceccon and Gabriel Combe, and my math teacher Jerome Dieudonne (we call him Sensei) we built our own VR headset for $100.
All my servos are a little bit different to each other - I\'ve built a rig to measure what PWM values turn my servos to a specific angle.
Android is a great platform to start building your apps, but its not the simplest to start with. For that reason we at hobbyist have built a kit which will take you through the process of building an App step by step.
This is my upgraded version of a Digital & Binary Clock using an 8 Digit x 7 Segment LED Display.
I like to give new features for usual devices, specially clocks, and in this case the use of 7 Seg display for Binary Clock is unconventional and it is an interesting and a different way of applying it.
Whether youre remotely controlling a chipKIT or Arduino over USB NI OSC Library for LabVIEW LINX by DigilentLabVIEW MakerHub Interface With Common.
Runs on any AVR microcontroller with at least 2 kB of Flash memory, Objective Development's Developer Article: Advantages over separate USB Peripheral.
Video embedded (2 are used for USB only if your program actively communicates over USB, Digispark DIY: the Smallest USB.
The RedBoard can be programmed over a USB MiniB cable using the Arduino IDE: of internal flash 1 MHz internal osc; BOD disabled) ArduinoTiny core.
Asynchronous Serial over USB AKA CDC. Mass Storage Devices Flash Drives, USB sticks, 382 comments to USB Host Shield library Version 2. 0 released.
Video embeddedIntro: Turn Your Arduino Uno Into an USBHIDMididevice. While building an Arduino Uno based MidiController for Ableton Live, I came across the HIDUINO project.
Amazon Echo is fun to use and it has a really cool feature to control most of the home automation devices that are available out there, like Philips Hue and other devices. But nothing is better than experimenting and building your own DIY Home automation system.
Some time ago I saw people reverse engineering the infrared protocol of the Syma S107G toy helicopter and I wanted to get my hands on it as well. It is a coaxial helicopter, which means that it doesn\'t require a torque cancelling tail rotor. Yaw is controlled by using the speed difference to a second rotor underneath the main rotor, which spins in the opposite direction.